Used Machines

G80 - SECOND HAND LTG-Mailänder coating line

make:             Mailänder
Type:               Coating machine type 431, LTG Oven
Year of built:  2009
Status:           in production

The KBA-MetalPrint coating line is still in operation. It consists of a feeder, type 770, a KBA-MetalPrint coating machine type 431, an oven with TNV and a single stacker type 803.

The line is also equipped with an Antiflecking - System and a Vaku - Matic table. A set of 20 rubber cylinders is also available.

The line is located in Italy and can be visited there.

The line is sold on behalf of the customer. The contact data will be supplied on request.

In agreement with KBA-MetalPrint a relocation can be offered.

 

G79 - SECOND HAND 1-Colour Mailänder 169 printing machine

make: Mailänder
Type:               169
Year of built:  1986
Status:           on stock


The Mailänder printing machine was in operation until March 2016. It consists of a feeder, type 730, a control console and a one colour Mailänder type 169 printing machine.

The printing machine was retrofitted with a new ink remote control system and a new printing cylinder.

Currently the machine is located in the Netherlands and can be visited there.

The line is sold on behalf of the customer. The contact data will be supplied on request.

In agreement with KBA-MetalPrint an overhaul can be offered.

 

G78 - SECOND HAND 2-Colour Mailänder 162 printing and coating line

make: Mailänder
Type: 162
Year of built: 1983
Status: dismantled

 

The Mailänder printing and coating line was in operation until Mai 2016. It consists of a feeder, type 760, a two colour Mailänder printing machine and an inline Mailänder 460 coating machine.

A typical feature of the 162 is the transfer drum between the first and the second unit. The printing machine was retrofitted with a new TGC ink remote control system.

The coating machine is suitable for spot coating.

An oven is not included in the scope of supply.

The line is sold on behalf of the customer. The contact data will be supplied on request.

In agreement with KBA-MetalPrint an overhaul can be offered.

 

 

G81 – KBA-MetalPrint 6-Color MetalWing 2

Make: KBA-MetalPrint

Type: 6-Color MetalWing 2 Refurbished

Year of built: 2017

Status : In production

The MetalWing press is a refurbished printing machine technically based on the proven design principles of KBA metal decorating presses.

Through specifically approved adaptations and modifications, these machines are successfully capable for metal sheet printing. In particular the solid construction of the printing units with lower substructure frame for double sized impression cylinders and transfer systems and upper substructure for plate cylinder, blanket cylinder and inking unit is especially suitable for printing on metal sheets.

Original spare parts are used to guarantee the same high standard of quality that customers have come to expect from a new KBA-MetalPrint press.

Standard Version six colour MetalWing printing press, including: 

  • Modification and refurbishment of the stream feeder for metal decorating
  • Retrofit KunziMatic patented registering system
  • For metal decorating special designed gripper pads and tips in impression cylinders
  • Additional sensors to each gripper system to monitor the sheets on the impression cylinders
  • Retrofit chromed side guide / manually adjustable
  • Cleaning and refurbishment of the press
  • New covering of the rollers for UV inks
  • New belt delivery

For further questions about the production line, please do not hesitate to contact us

Areas of application:

  • for conventional ink
  • for UV ink
  • for Hybrid (mixed operation using conventional and UV)

The configuration of the production line is individual.

G82 – KBA-MetalPrint 2-Color Mailänder type 280 production line

Make: KBA-MetalPrint

Type: 2-Color Mailänder type 280

Year of built: 2013

Status : In production

The KBA-MetalPrint Printing line is currently in operation. The line consists of a feeder type 780, 2 printing units of Mailänder type 280, a UV-drying system, a sheet management system and a VacStack single box stacker unit type 806.

The production line is currently in operation and will be available from December 2017.

The printing units of the Mailänder 280 have the following characteristics

 

  • Semi-automatic plate changer SAPC
  • KBA ColorTronic inking remote control
  • Alcohol damping unit VariDamp
  • Cooling of the inking rollers
  • Automatic blanket washing device
  • Motorized diagonal register
  • High-quality plasma-coated surfaces on plate and blanket cylinders
  • The multi-row roller bearings can be adjusted without clearance and ensure maximum stability and precision

For further questions about the production line, please do not hesitate to contact us

G83 – Flexo-Scraping-System for coating machines types 4040, 470 and for 480

Make: KBA-MetalPrint

Type: Flexo Scraping System

Year of built: 2016

Status: for test purposes

The scraper blade is fixed into a quick clamp assembly which guarantees a really fast blade change.

The scope of delivery also includes a holder. With this holder it is possible to replace the worn-out scraper blade while the production is running.

Existing scraper blades can be still used after being modified.

Benefits:

  • Fastest scraper blade change
  • Considerably longer blade life
  • Faster bedding-in of the scraper blade
  • Reduced adjustment time

The Flexo-Scraping- System will be provided for test purposes. The installation however is liable to costs.

G84 – Second Hand 2-Colour Mailänder 122A Printing and coating line

Make: Mailänder

Type: 122A

Year of built: 1996

Status: in production

The Mailänder printing machine is in operation. It consists of a feeder type 770, two printing units of Mailänder type 122A, one 469 Mailänder coating machine and a LTG oven.

The damping unit is operated with alcohol and an automatic plate change is installed in the machine.

The machine is currently located in Turkey and can be visited there.

The line is sold on behalf of the customer. The contact data will be supplied on request.

In agreement with KBA-MetalPrint an overhaul can be offered.